Bullfrog Spas - 8 Star Energy Rating
The World's Most Energy Efficient Spa

Bullfrog Spas have been designed using a unique patented technology. After rigorous research into all the positive design features of the conventional spa, Bullfrog Spas combined all these features with the greatest development in portable spas -the JetPak™ System.


This revolutionary patented technology has allowed for modular configuration of the spa to enable customising, interchanging and upgrading of the spa jetting. Large diameter main-line plumbing is used to maintain optimum pressure from the specially matched equipment configuration, which means that there is 90% less plumbing and less friction, equalling increased water pressure and therapy performance.

www.bullfrogspas.com

Just Spas has the exclusive rights to manufacture Bullfrog Spas in Australia.
EnergySave™ means Energy Efficient - Most Energy Efficient means Lowest Cost to Own
JetPak Spas are the most energy efficient spas in the world. The "EnergySave” design insulates the spa completely to prevent heat escape. With JetPak® technology, heat is recycled in the spa because the plumbing stays immersed in the hot water. Every single JetPak Spa model meets or exceeds the stringent energy guidelines of California Energy Commission (CEC). With the superior energy efficiency, you will enjoy keeping extra money each month almost as much as you will enjoy relaxing in your spa.

JetPak Spas are different. Up to 90% of the plumbing is on the JetPak submerged in the hot water so any heat from water in the plumbing transfers to the spa water rather than being lost to the cold outside environment. JetPak Spas also recycle energy by using warm air from the equipment compartment to help to heat the water in the spa, rather than using cold outside air, as is the case with many other spas. These unique energy-saving features will keep monthly power bills surprisingly low and will keep you relaxed and worry free!
JetPak Spa Conventional Spa
Heat from JetPak plumbing transfers directly into the hot spa water, recycling energy. JetPak Spas are fully foam insulated. Heat from plumbing escapes under the spa and is wasted. This spa has no foam insulation.
Leak Proof - The only spa with a truly watertight story!
To install jets in a conventional spa, holes are drilled into the spa shell. Each jet becomes a potential leak point as the integrity of the shell has been compromised. Such leaks can waterlog the underside of the spa causing serious damage.

Bullfrog’s exclusive LeakGuard design provides unmatched security against leaks. Jets are fitted into removable JetPaks instead of being drilled into the spa shell. The shell remains intact and watertight!

All JetPak plumbing is contained within the spa; therefore if a leak did occur, it would be contained inside the walls of the spa where it would not cause damage. If service is ever needed, plumbing is easily accessed behind each JetPak. No other spa offers this much peace of mind.

Full-Foam Insulation
Each Bullfrog Spa is completely filled with closed-cell foam insulation.  This type of foam limits heat transfer through the insulation for supreme energy efficiency.

Heated Air-intake System
Bullfrog's jet air-intake system is specifically designed to capture heat generated from the motors, pumps and heater.
Bullfrog Spa - Fully Foamed Other Spas - No Foam Fill
Heat from JetPak plumbing transfers directly into the spa water therefore recycling energy. Heat from plumbing escapes outside into the air, wasting energy.